Home > Sawing > Horizontal Bandsaws Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Amada HFA250W automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Bandsaw Machine HFA250W The Amada HFA250W automatic bandsaw is designed around the capability of the saw blade, therefore guaranteeing optimum cutting performance. Utilising a 34mm wide blade the Amada HFA250W bandsaw machine has sufficient beam strength to enable it to cut any metal quickly and efficiently, up to its maximum capacity of 250mm, thus delivering an excellent cost-per-cut ratio. NC Rear Vice The rear vice is controled by an LED Programming unit situated on the control panel. Number of cuts , tolerance, and auto trimming functions can all be set by the unit. Up to 99 different programmes can be set. Tolerance The tolerance of the material to be cut can be set from +/- 0.1 to +/- 1mm Auto trim cut Material can be measured for the first cut from the front vice resulting in the trim cut being a cut component piece. Pressure/flow feed control The independent pressure and flow controls in series ensure that optimum cutting can be achieved regardless of the section or alloy being cut. Drive wheel transmission This is designed and built by Amada to provide high efficiency reduction, therefore delivering more power to the large diameter shaft. This ensures that developed torque is transferred to the blade. Maximum cutting capacity Round bar: 250 mm round bar Rectangular bar: 300mm wide x 250mm high Automatic, powered chip conveyor.
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      GEORG
      Model:
      George CY 270N
      Description:
      Manufacterer: George Model: CY 270N Year: Control: Cutting diameter: 225 mm Saw blade size: 2480x27x0,9 mm Cutting speed: 45-90 m/min. Cutting capacity - round (0°): 225 mm Cutting capacity - square (0°): 190 mm Cutting capacity - rectangle (0°)...

      More Info

    • Manufacturer:
      Addison
      Model:
      Special Offer | Addison Jubilee 250-T Mitre Bandsaw
      Description:
      Precision two-way miter cut to 45 and 60 degrees, right and left | Large mitre scale for precision angle cuts | Swivel head for easy angle cutting without moving material | Electric coolant system with built-in tank and pump | Highly efficient, low e...

      More Info

    • Manufacturer:
      Model:
      SN 300 NEWTON
      Description:
      NEWTON DEVICE DESCRIPTION ACCESSORIES UPON REQUEST: DIMENSIONS > 1400 x 1500 x 1800 mm WEIGHT > 430 kg > Round tubes 45° sx: 160 mm 0: 220 mm 45° dx: 200 mm 60°: 130 mm > Square profiles 45° sx: 120 mm 0: 290 mm 45° dx: 150 mm 60°: 110 mm > R...

      More Info

    • Manufacturer:
      Horizon
      Model:
      Sealey 12" Hydraulic Arm Horizontal Bandsaw
      Description:
      Sealey 12” Horizontal Bandsaw Hydraulic Arm Model No: SM353CE Single Phase Machine Cutting Capacity: 90° Deg Round - Ø230mm 90° Sq. / Rect (H x W) - 230 x 370mm 90° Bar H x W – 30 x 400mm 45° Round Ø185mm 45° Sq. / Rect (H x W) – 230 x 1...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User